Caso-germany WineDuett 12 User Manual download pdf (Page 28)

caso Wine Duett 28

11.6 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the following

instructions must be observed for the electrical connection:

• Before connecting the device, compare the connection data (voltage and frequency) on

the rating plate with those of your electrical network. This data must agree in order that

no damages occur in the device. If in doubt, ask your qualified electrician.

• The electrical outlet must be protected by a 16A safety cut-out switch.

• The connection between the device and the electrical network may employ a 3 meter

long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs

or gangs is prohibited because of the danger of fire that is involved with this.

• Make sure that the power cable is undamaged and has not been installed under or over

hot or sharp surfaces.

• This unit is not designed to be installed in an RV or used with an inverter.

• The electrical safety of the device is only guaranteed if the device is connected to a

properly installed protective conductor system. Operations using an electrical outlet

without a protective conductor are prohibited. If in doubt, have the house installation

checked over by a qualified electrician.

The manufacturer cannot be made responsible for damages that are caused by a

missing or damaged protective conductor.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 82 83

No comments

Caso-germany WineDuett 12 User Manual Page 28